8mm Silver Chrome Effect End Cap Trim 2700mm Length

8mm Silver Chrome Effect End Cap Trim

Cap off any 8mm cladding panel edge with a 8mm Chrome effect end cap cladding trim

The Chrome Effect End Cap Trim is the ideal solution to covering any open ended cladding edge, say a shower area or half clad room where the edges of the cladding are exposed after fitting.

The end cap is simple to fit and can be fitted either before, during or after fitting the 8mm cladding panels. The trim can be cut to size and simply fits snug over the edge providing a neat and tidy finish. When it comes to an exposed edge the easiest method is to fit the trim after installing the panels to the desired point along the surface.

This trim boasts a shiny reflective chrome surface, that would work well with any of the chrome inlay panels or chrome downlights.

End caps can be used around door frames, architraves, bath panels, boxings or any exposed cladding panel edge.

All of our trims are suitable for wet areas, we recommend applying a bead of silicone along the insert of each trim before fitting the cladding to it, this ensures a water tight seal between the cladding panels and the trim.

The profile of the end cap trim measures 10mm, which is more than sufficient when it comes to covering up any roughly cut edges of your 8mm cladding

The trim is 2700mm (2.7m) long, suitable for stronger, thicker 8mm cladding panels.