5mm Black End Cap Trim 2700mm Length

5mm Black End Cap Matte Effect Trim

Cap off any 5mm cladding panel edge with a 5mm black end cap cladding trim

The Black End Cap Trim is the ideal solution to covering any open ended cladding edge, say a shower area or half clad room where the edges of the cladding are exposed after fitting.

The end cap is simple to fit and can be fitted either before, during or after fitting the 5mm cladding panels. The trim can be cut to size and simply fits snug over the edge providing a neat and tidy finish. When it comes to an exposed edge the easiest method is to fit the trim after installing the panels to the desired point along the surface.

The Black end cap suits mainly darker shade or black sparkle cladding panels.

End caps can be used around door frames, architraves, bath panels, boxings or any exposed cladding panel edge.

The profile of the end cap trim measures 10mm, which is more than sufficient when it comes to covering up any roughly cut edges of your 5mm cladding

All of our trims are suitable for wet areas, we recommend applying a bead of silicone along the insert of each trim before fitting the cladding to it, this ensures a water tight seal between the cladding panels and the trim.

The trim is 2700mm (2.7m) long, suitable for 5mm cladding panels.